您的位置: 标准下载 » 美军标 MIL » MIL-HDBK »

MIL-HDBK-7B

时间:2024-05-16 08:33:39 来源: 标准资料网 作者:标准资料网 阅读:9041
下载地址: 点击此处下载

MIL-HDBK-7B, MILITARY HANDBOOK: LUMBER AND ALLIED PRODUCTS (6 AUG 1982)., lumber and wood products normally procured in considerable quantity for Department of Defense installations. Engineers are particular directed to the chapters dealing with strength of wood, preservative treatment, and moisture c o n t e n t . The chapters dealing with storage handling, tallying, inspection, grading, and sizes were written with the problems of inspectors, stock handlers, and supply clerks in mind. All of these chapters prove useful to the requisition writer by providing references useful in determining which species, q u a l i t i e s , and sizes of lumber, plywood, poles, railroad ties, and other wood products are usable for a given end use. This handbook also provides ready reference to the physical and mechanical properties of lumber products and the conditions of use that require special treatment with preservatives, fire r e t a r d a n t s , or special surfacing and machining. It is the primary purpose of this handbook to provide the kind of background information needed in making necessary decisions on all such problems. This type of information is not readily available elsewhere in a form directly related to supply problems involving lumber and allied products. To the extent that this handbook achieves its primary purpose, it is believed that important economies can be effected, greater assurance secured that the needed species, q u a l i t i e s , q u a n t i t i e s , and sizes will be received, and requisitioning procedures f a c i l i t a t e d . The handbook also has as part of its purpose to provide information on the handling, storage, and use of wood products to the end that better service will be obtained at less cost. The large quantities of wood products normally required by the various branches of the Department of Defense make economy of use just as essential as economical procurement; failure in the one can quickly offset any gains realized through success in the other. Moreover, proper handling, storage, and use are essential in the interest of conservation of the forest resources.

下载地址: 点击此处下载
【英文标准名称】:Testingofcables,wiresandflexiblecords;resistancetodirectcurrentVDESpecification
【原文标准名称】:电缆、绝缘导线的试验.直流耐阻
【标准号】:DINVDE0472-510-1984
【标准状态】:作废
【国别】:德国
【发布日期】:1984-09
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:特性;导电体;介电强度试验;电气试验;计数检查;绝缘电缆;电气工程;试验;电缆
【英文主题词】:cables;electricaltesting;inspectionbyattributes;dielectric-strengthtests;electricalengineering;electriccables;insulatedcables;electricconductors;properties;testing
【摘要】:
【中国标准分类号】:K12;K13
【国际标准分类号】:29_060_20
【页数】:3P;A4
【正文语种】:德语


基本信息
标准名称:智能型阀门电动装置
英文名称:Intelligent valve electric actuator
中标分类: 机械 >> 通用零部件 >> 阀门
ICS分类: 流体系统和通用件 >> 阀门 >> 其他阀门
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2012-05-11
实施日期:2012-12-01
首发日期:2012-05-11
作废日期:
主管部门:全国阀门标准化技术委员会(SAC/TC 188)
提出单位:中国机械工业联合会
归口单位:全国阀门标准化技术委员会(SAC/TC 188)
起草单位:合肥通用机械研究院、扬州电力设备修造厂等
起草人:黄明亚、刘伟军、姜迎新、项美根、赵龙等
出版社:中国标准出版社
出版日期:2012-12-01
页数:20页
适用范围

本标准规定了智能型阀门电动装置的术语、技术要求、试验方法、检验规则、标志、包装、运输和贮存条件等。
本标准适用于以电动机直接驱动的开关型、调节型的智能电装。

前言

没有内容

目录

前言 Ⅰ 1 范围 1 2 规范性引用文件 1 3 术语和定义 1 4 功能要求 2 4.1 控制与设定 2 4.2 运行状态指示 2 4.3 参数组态 2 4.4 故障自诊断与数据记录 2 4.5 通信 2 5 技术要求 3 5.1 构成 3 5.2 一般要求 3 5.3 电磁兼容性要求 6 5.4 调节型智能电装 8 5.5 隔爆型智能电装 8 6 试验方法 8 6.1 通用技术要求试验部分 8 6.2 电磁兼容性试验部分 11 6.3 功能检查 11 6.4 调节型智能电装试验 11 6.5 隔爆试验 12 7 检验规则 12 7.1 出厂检验 12 7.2 抽查检验 13 7.3 型式检验 13 8 标志、包装、运输及贮存 14 8.1 标志 14 8.2 包装 15 8.3 运输和贮存 15

引用标准

下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB755 旋转电机 定额和性能
GB/T3797 电气控制设备
GB4208 外壳防护等级(IP代码)
GB4824 工业、科学和医疗(ISM)射频设备 电磁骚扰特性 限值和测量方法
GB/T12222 多回转阀门驱动装置的连接
GB/T12223 部分回转阀门驱动装置的连接
GB/T13306 标牌
GB/T15479 工业自动化仪表绝缘电阻、绝缘强度技术要求和试验方法
GB/T17626.2 电磁兼容 试验和测量技术 静电放电抗扰度试验
GB/T17626.3 电磁兼容 试验和测量技术 射频电磁场辐射抗扰度试验
GB/T17626.4 电磁兼容 试验和测量技术 电快速瞬变脉冲群抗扰度试验
GB/T17626.5 电磁兼容 试验和测量技术 浪涌(冲击)抗扰度试验
GB/T17626.6 电磁兼容 试验和测量技术 射频场感应的传导骚扰抗扰度
GB/T17626.8 电磁兼容 试验和测量技术 工频磁场抗扰度试验
GB/T17626.11 电磁兼容 试验和测量技术 电压暂降、短时中断和电压变化的抗扰度试验
GB/T18268.1 测量、控制和实验室用的电设备 电磁兼容性要求 第1部分:通用要求
GB/T24922—2010 隔爆型阀门电动装置技术条件
GB/T24923 普通型阀门电动装置技术条件
JB/T8862 阀门电动装置 寿命试验规程

所属分类: 机械 通用零部件 阀门 流体系统和通用件 阀门 其他阀门